AISI 4140 Alloy Steel | 1.7225 | SCM440 | 42CrMo4
1. SAE AISI 4140 steel Form of Supply
ASTM / AISI 4140 Alloy structural steel, we can supply the round bar, steel flat bar, plate, hexagonal steel bar and square, block. 4140 alloy steel Round bar can be cut to your required lengths as one offs or multiple cut pieces. Rectangular pieces can be cut from flat bar or plate to your specific sizes. Ground tool steel bar can be supply, providing a quality precision finished bar to tight tolerances.
AISI 4140 Steel Characteristics
1.It is low alloy steel with chromium, molybdenum, and manganese.
2.Great toughness, fatigue strength, abrasion and impact resistance.
3.It is widely be used in the industry due to its excellent versatility and usefulness.
4.The higher carbon content in it, the higher the strength and heat treatment capabilities it is.
5.It can be oil hardened to relatively high hardenability.
Supply Size range
Hot Rolled 4140 steel bar: Ø5mm-200mm
Forging 4140 steel bar: Ø140mm-3000mm
Hot rolled 4140 steel plate: Thickness 10mm-200mm x width 100-2300mm
Forged 4140 material steel plate: Thickness 150-1500mm x Width 100 x 3000mm
Others 4140 material have not specified size, pls contact our experienced sales team.
4140 Steel Round Bar Sheet Plate Heat Treatment
Machinability
At the annealed condition, 1.7225 alloy tool steel has good machinability.
Forming
DIN 1.7225 steel has high ductility. It can be formed using conventional techniques in the annealed condition. It is required more pressure or force for forming because it is tougher than plain carbon steels.
Welding
1.7225 alloy steel can be welded using all advanced techniques. But, the mechanical properties of it will be affected if it is welded in the heat treated condition, and post weld heat treatment should be performed.
Heat Treatment
1.7225 tool steel is heated at 845°C(1550°F) followed by quenching in oil. Before hardening, it can be normalized by heating at 913°C (1675°F) for a long period of time followed by air cooling.
Forging
It is forged at 926 to 1205°C(1700 to 2200°F)
Hot Working
4140 steel can be hot worked at 816 to 1038°C(1500 to 1900°F)
Cold Working
1.7225 steel can be cold worked using conventional methods in the annealed condition.
Annealing
Heat it to 800℃ – 850℃, hold until temperature is uniform throughout the section and cool in furnace.
Normalizing
Heat 1.7225 alloy steel to 870℃ – 900℃, hold it until the temperature is uniform throughout the section, soak for 10 – 15 minutes and cool in still air.
Tempering
DIN 1.7225 steel can be tempered at 205 to 649°C (400 to 1200°F) depending upon the desired hardness level. The hardness of the steel can be increased if it has lower tempering temperature. For example, tensile strength of 225 ksi cab be achieved by tempering at 316°C (600°F), and tensile strength of 130 ksi can be achieved by tempering at 538°C (1000°F).
Hardening
DIN 1.7225 alloy steel can be hardened by cold working, or heating and quenching.
We have been specializing in the production of 4140 alloy steel for decades, providing 4140/1.7225/SCM440 alloy round bar, square and flat steel, etc. We have our own cutting and processing facilities, rich production experience, and the specifications can be customized according to your needs Requires tailoring and customization. Over the years, we have been focusing on special steel dealers and suppliers with high-quality booths. As a professional AISI 4140 steel supplier, you are welcome to inquire at any time.songshunsteel1826
